MEL-ROL LM is designed to be used from the pail or drum with little or no mixing. For specific project recommendations, please contact W. MEADOWS prior to application of the membrane. All cracks greater than 1/16″ (1.6 mm) should be taped with DETAIL STRIP from W. MEADOWS prior to application of MEL-ROL LM.Īll shrinkage cracks less than 1/16″ (1.6 mm) should be pretreated with a 60-mil coat of MEL-ROL LM 6″ (152.4 mm) wide. All inside corners should be addressed with a cove of BEM from W. All loose laitance on the substrates, such as dirt, dust, loose stones, and debris, should be either swept or blown clean. Patch any bug holes, tie holes, large gaps, or cracks with MEADOW-PATCH ® 5 or MEADOW-PATCH 20 from W. APPLICATIONĪll surfaces must be clean (free of all coatings and curing compounds), free of frost, relatively smooth, and structurally sound. This document has been created as an addendum to the MEL-ROL LM technical datasheet to provide the recommended procedure to use when installing MEL-ROL LM single-component, polymer-modified, cold-applied, water-based, liquid waterproofing membrane from W.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
January 2023
Categories |